LPS 02616 PTFE Dry Film Lubricant 12 oz

Features

• Dry-film PTFE lubricant
• Reduces friction and wear
• Thin dry film will not attract dust or dirt
• Suitable for high-temperature applications up to 500°F (260°C)
• Colorless and non-staining
• Does not contain silicone
• Ideal for releasing molded parts
• Provides lubrication without a heavy wet film
• Petroleum-based formulation
• Contoured aerosol can for improved hand grip

Applications

LPS 02616 Dry Film PTFE Lubricant is designed for sliding, moving and release applications where a clean, dry lubricating film is preferred.

• Chutes and slides
• Conveyor belts
• Injection molding equipment
• Locks and catches
• Metal extrusions
• Silicone rubber
• Sliding drawers and bins
• Thermoplastics
• Thermosets
• Window guides
• Mold-release applications

Specifications & Compliance

Note: Refer to the manufacturer's current Technical Data Sheet and Certificate of Conformance for application-specific requirements and current specification status.

Product Specifications

Product Information

LPS 02616 deposits a thin, dry PTFE film designed to reduce friction and wear while resisting the attraction of dust and dirt. The colorless, non-staining film is useful where a clean, dry lubricant is preferred over a conventional wet lubricant.

The dried film is designed for high-temperature applications up to 500°F (260°C). The product is also formulated for releasing molded parts and lubricating sliding surfaces in thermoplastic, thermoset and metal applications.

Directions

1. Clean the surface and remove dirt, grease and other contaminants before application.
2. Shake the aerosol thoroughly before use.
3. Apply a light, even coating to the surface requiring lubrication or mold release.
4. Allow the coating to dry completely before placing the component into service.
5. Apply additional coats only as required for the specific application.

Safety: LPS 02616 is a highly flammable aerosol. Keep away from heat, sparks, open flames and other ignition sources. Use only in accordance with the manufacturer's current SDS and application instructions.

Frequently Asked Questions

What is LPS 02616 used for?

LPS 02616 is a dry-film PTFE lubricant used to reduce friction and wear on sliding and moving surfaces. Manufacturer-listed applications include chutes, slides, conveyor belts, locks, catches, window guides, drawers, bins and molded-part release.

What is the temperature rating of LPS 02616?

The dried PTFE film is designed for high-temperature applications up to 500°F (260°C).

Does LPS 02616 attract dust and dirt?

No. The manufacturer describes the product as a thin dry film that will not attract dust or dirt.

Is LPS 02616 silicone-free?

Yes. The manufacturer states that LPS Dry Film PTFE does not contain silicone.

Is LPS 02616 non-staining?

Yes. The manufacturer describes the dried film as colorless and non-staining.

Is LPS 02616 non-flammable?

No. The aerosol is classified as highly flammable. The high-temperature rating applies to the dried PTFE film, not to the aerosol during application.

What size is LPS 02616?

Part number 02616 contains 11 wt oz (312 g / 468 mL) and is supplied in an aerosol container. The product is packaged 12 units per case.

What is the shelf life of LPS 02616?

The manufacturer currently lists a 5-year shelf life for part number 02616.