GSE

The Tronair 02-0536C0110 is a 5 ton jack that is designed to lift aircraft for maintenance. Closed height of 36 inches and can extend up to 68 inches.  Previous models 02-0536-0110, 02-0526-0100.

The Tronair 02-7812C0110 are 5 ton tripod aircraft jacks for use on the Piaggio P-180 Avanti mains.

The Tronair 02-7856C0100 is a 5 ton aircraft tripod jack with jack application heights ranging from 30 to 64 inches. Previous models 02-0530-0100, 02-0530-0110, 02-0530-0111, 02-0532-0100, 02-7856-0100.

Prior model 02A0517-0140. The Tronair 02A0517C0140 is a 5-ton capacity aircraft jack with an air pump installed on the unit. This jack's height ranges from 17 to 46 inches. To control the 3 jacks with air pumps from a single location, add K-1106 kit.

Tronair Replacement Seal Kit #K-1309.

The Tronair K-3828 is a 12 ton hand pump kit for some Falcon aircraft.

Kit, Replacement 4 In Flange Adapter, Tronair. The Tronair K-1210 is a replacement 4-inch flange adapter used on some Tronair aircraft lav carts like the 10-6402-0010, 10-6410-0000, 10-6412-0000.

Tronair Waste & Fill coupler adapters for Learjets (esp. models 45 and 60). Includes aircraft fill connection, reinforced nylon tube, and adapter for connection to standard fill coupler, and same for waste line.

Tronair K-1509 is a Clog Indicator Seal kit.

The Tronair K-1996 is a pump gasket & o-rings kit for use on some Tronair HPUs.  Previous part K-1713.

The Tronair KHC-1004 is a coupling kit for pressure and return lines to connect to aircraft.  Adapt hose to a specific aircraft bulkhead coupling.

The Tronair KHC-1006 is a quick-disconnect hydraulic coupler kit for the Merlin III and IV aircraft. These units are for use on pressure and return hoses of a hydraulic power unit.