BAC #: MOLYKOTEDX
Molykote DX Lubricant Paste 2.2 lb
DUPONT
Description
Molykote DX is primarily used for assembly and running equipment, especially where staining by black solids may be undesirable. “Clean” white paste, handles very heavy loads and will not drip or run. 2.2 lb can. Shelf life 1800 days.
Features
Almost invisible in thin films
Provides excellent protection against fretting corrosion and galling. It is mineral oil based paste containing white solid lubricants with no metals.
Temperature Range: Solids from -15 to 255° F (-25 to 125° C), base oil from –40 to 250° F (-40 to 121° C).
Molykote DX is mainly used in assembly, fastening, and wear-prone metal interfaces:
Threaded fasteners
Bolts, screws, studs in structural or equipment installations
Prevents galling (especially stainless steel or dissimilar metals)
Splines and sliding fits
Shafts, couplings, and mating components
Helps prevent fretting and seizure under load
Hinges and pivot points (metal-on-metal)
Doors, access panels, landing gear doors (non-flight-critical unless specified)
Press fits and interference assemblies
Eases installation and later removal
Brake system hardware (select applications)
Backing plates, pins, or contact points (only where specified)
Related Products
Molykote 111 Silicone Lubricant
DUPONT
$33.13
/EA
Molykote DC33 Light Low Temp Grease, 100 gm
DUPONT
$44.44
/EA
Molykote 44 Medium, High Temp Bearing Grease, 100 gm
DUPONT
$47.09
/EA
Molykote DC4 Electric Insulating Compound *5 left*
DUPONT
$23.31
/EA